40 x 98 Barn Door.  Used (7)  1 x 6 pine for door frame.   (2) 1 x4 for the right and left side.  (1)  1 x 10 for the center cross piece.  (4) 1 x 6 for the angle cuts and bottom and top.  

Removed the installed medicine cabinet and built the open concept medicine cabinet out of pine wood and a beaded backboard.  

Surrounded the guest bathroom mirror with various sizes of pine.  Glued to attach the frame to the mirror.  

Bathroom storage shelf made with 2 x 4 and 2 x 6 pine.  Also, attached chicken wire to the back with a rope to hang the shelf.

Small pine tissue holders.

Used pine wood to create this shelf.  Also had to use cabinet hinges and a gas operated damper.  I finished it by burning the wood with a torch.

Guest bedroom accent wall.  Used 1 x3 to complete the whole wall with boxes.  

Panel wall in guest bathroom with towel and bathrobe hangers

Wooden shelf with hooks to hang clothes

Small plant pot stand

This project started as a piece of furniture that was going to be thrown away.  It was rusted and all the wood was warped and falling apart.  I took the metal cleaned it up and repainted.  Replaced the top and all the shelves.  Put tile on top and made wooded drawers to match the stands angles.  With the left over tile made four coasters.

Workbench to hold my table saw

Decretive fence to as accent to guest bedroom.

Took an existing mirror and made a wood frame to match guest room accents

Workbench to fit all my main tools for woodworking.  Sander, Drill press, wood planer and router

Rolling stand for my table saw

Table used to hold our outside portable washer